Alan PaynterSoftware, RC racing, and things I make

Interests / RC off-road racing

Ten times smaller. Just as serious.

1/10 scale electric off-road racing is proper motorsport in miniature: setup sheets, tyre choice, gearing, and five-minute heats where one mistake costs you the final.

  • 1/10 2WD buggy
  • Electric
  • Dirt and clay
Alan's Serpent 2WD buggy with a red and blue body, side on

01 / On the bench

Serpent SRX2 Gen3 Team

A 1/10 two-wheel-drive buggy from Serpent, and one of the cars I race. 2WD is the purist class: all the power goes through the rear wheels, so throttle control and setup matter more than anywhere else.

These are the electronics that live in it.

Chassis
Serpent SRX2 Gen3 Team
Class
1/10 electric 2WD buggy
Radio
Sanwa Exzes ZIII
Receiver
Sanwa RX-493i
ESC
Hobbywing XR10 Pro G3
Rendered spur gear, slipper clutch and pinion on a brushless motor
Spur, slipper and pinion: where a lot of 2WD setup happens

02 / Why it's hooked me

Everything you can tune, you will tune.

SETUP

Every track is different

Ride height, camber, shock oil and springs all change with the surface, and the surface changes through the day.

TYRES

The biggest single choice

Pin, spike or bar, soft or hard, and whether to sauce them. Get it wrong and nothing else matters.

GEARING

Pinion and spur

Punch out of the corners against top speed on the straight, balanced against motor temperature.

DRIVING

Consistency wins

A clean, steady lap beats one fast lap and a crash. It takes practice to learn that.

03 / From the pits

My cars, over the years.